SWAN SWU310N Air compressor with oil flooded piston, 8Bar, 10HP electric motor. SN series are equipped with enforced lubricating system, and can be continuously running for long hours under loading condition. 3phase Features Big Crankcase oil sump. Special oil-filled crankshaft. Built-in enforced lubrication system provides highly reliabe solutions. Oil pressure protection mechanism. Effective air circulative cooling system. Unloading design. Design for heavy duty industries. Control System Automatic Unloader System “U” Type The automatic unloading system allows for the control of loaded and unloaded compressor states through a range of preset pressure valves. This system is recommended where the duty cycle exceeds 50% and for all larger compressor unit. Specifications Motor 7.5kw / 10hp, 415V, 3 Phase Working Pressure (kg/cm²) 8 Bar (Max. 10 Bar) Compressor Speed 850 rpm F.A.D 1151 L/min Tank Capacity 300 Liter Compressor Block Physical Dimension (L x W x H) 700mm x 460mm x 560mm Weight (Bare Head only) 95 kg Compressor Unit Physical Dimension (L x W x H) 1835mm x 650mm x 1200mm Weight (Whole Unit) 250 kg read more

PEDROLLO CENTRIFUGAL PUMP Model: F32/200B (Made in Italy) Pedrollo centrifugal pump with energy saving motor “IE3”. Three phase, 415V. Descriptions Used for: water supply, cleaning sets, pressure boosting, firefighting sets, irrigation, industrial applications, water circulation in climatisation sets, agricultural applications. The pumps must be installed in enclosed places, or at least protected against inclement weather. Features Liquid type: clean water Uses: industrial Applications: water supply systems, fire-fighting sets, air conditioning systems, washing systems, pressure systems, cooling systems, irrigation pumps typology: surface Family: standardized centrifugal pumps Performance Range Flow rate up to 6000 l/min (360,0 m³/h) Head up to 95 m Applications Limit Temperature of the liquid from -10 °C to +90 °C Ambient Temperature da -10 °C to +40 °C Manometric suction lift up to 7 m Max. pressure in pump body 10 bar (PN10) Continuous service S1 Specifications Size Discharge 2″ x 1-1/4″ Power 5500 W / Three phase Flow Rate 100 ~ 500 L/min Head 51 ~ 36 meters Manometric Suction Lift Max. 7 meters Liquid Temperature Max. +90°C Environment Temperature Max. +40°C Dimensions (L x W x H) 515mm x 270mm x 340mm Weight 48.4 kg read more

Pedrollo Centrifugal Pump Model: F50/160B (Made in Italy) Pedrollo centrifugal pump with energy saving motor “IE3”. Three phase, 415V. Descriptions Used for: water supply, cleaning sets, pressure boosting, firefighting sets, irrigation, industrial applications, water circulation in climatisation sets, agricultural applications. The pumps must be installed in enclosed places, or at least protected against inclement weather. Features Liquid type: clean water Uses: industrial Applications: water supply systems, fire-fighting sets, air conditioning systems, washing systems, pressure systems, cooling systems, irrigation pumps typology: surface Family: standardized centrifugal pumps Performance Range Flow rate up to 6000 l/min (360,0 m³/h) Head up to 95 m Applications Limit Temperature of the liquid from -10 °C to +90 °C Ambient Temperature da -10 °C to +40 °C Manometric suction lift up to 7 m Max. pressure in pump body 10 bar (PN10) Continuous service S1 Specifications Size Discharge 2-1/2″ x 2″ Power 5500 W / Three phase Flow Rate 300 ~ 1100 L/min Head 32 ~ 21 meters Manometric Suction Lift Max. 7 meters Liquid Temperature Max. +90°C Environment Temperature Max. +40°C Dimensions (L x W x H) 535mm x 269mm x 340mm Weight 53 kg read more

Pentax Monobloc Centrifugal Industrial Water Pump  MODEL: CM40-160B 3kW, 415V/3ph/50Hz Three phase, Class F, IP55 Suction/Discharge: 65mm X 40mm Q (L/min):150~600, H(m)30.1~19.1 Cast iron Impeller, Liquid 0~90°C Power Phase Three Phase Pump Power kW 3 Pump Q. Max litre per min 650 Pump H Max m 30 read more

Submersible Dewatering Pump Model: IC45B  Is submersible dewatering pump for agriculture water supply. 3 phase Features The internal casting is treated with high solid painting, which can double the duration of anti-rusting, and extend the lifetime of the product. Standard design, incorporating a dry motor with thermal auto-cut that prevents the motor from over heating, and a cast iron motor frame for a faster heat dissipation. As well as an abrasion resistant double mechanical seal and an additional oil seal. Water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings. An exceptional High-lift and suction impeller design, which allow for dewatering of underground or circulating water applications. For above or below surface water applications; the IC pump strainer can be easily removed and replaced with a check valve, which allows for dewatering up to max. 8m deep of underground water and water circulation applications. (W–Well Type) New casing cover, with metric thread bolt hole that is easier for valve and adapter connection. High solids Epoxy coating prolong metals from corrosion and oxidisation. Applications Agriculture water supply and drainage. Water supply for agricultural irrigation systems and underground water pumping. Landscape, water feature and horticulture irrigation. Extraction of water from rivers, lakes and reservoirs. Limits of use Liquid temperature: 0~40°C (32~104) Submersion Depth: 30m (100 ft) Specifications Power 5 HP (3700 watts) Discharge 4″ (100mm) Phase 3Ø Start Method Direct Efficient / Maximum Head 12.5 / 20 meters Efficient / Maximum Flow Rate 1000 / 1500 L/min Solid Passage 10mm (3/8″) Weight 44 kg read more

Toho Agitator Mixer TG-75 Model : Toho TG75 Power : 0.75 kw , 3phase , 50Hz read more

ARO DIAPHRAGM PUMP 1-1/2'' METALLIC MODEL :666170-322-C  1-1/2'' Diaphragm Pump Pro Series with Aluminum body, BSP threads, Stainless fluid cap/manifold, Steel hardware, 316 Stainless seat, Teflon PVDF ball, Teflon PVDF/Santoprene diaphragm PRODUCT TYPE Pump MATERIAL - DIAPHRAGM Nitrile BRAND ARO PUMP APPLICATION Air Operated INLET/OUTLET CONNECTION TYPE BSP MATERIAL - HOUSING Aluminum SOLIDS HANDLING 1/4 in MATERIAL - BALLS Nitrile MATERIAL - SEATS Polypropylene MAX AIR INLET PRESSURE 120 psi (8.3 bar) MAX FLOW 90 gpm (340.7 lpm) MAX FLUID PRESSURE 120 psi (8.3 bar) MAX TEMPERATURE 350°F (176.7°C) NOISE LEVEL 80.5 dB(A) read more

Greenco Side Channel / Ring / Regenerative Blower MODEL: 2RB 510-7AH26 1.6kW 2RB Single Stage Blower (CR-429) 415V/3PH he G-Series side channel blower feature voltage range motors for 50Hz in protection class IP55 (Insulation class F) with UL/CCC/CE approved. The impellers in this series's blower are mounted directly on the motor shaft for non contact compression entirely without friction. Maximum operational reliability, even at high differential pressures is ensured by the arrangement of the bearings outside the compression chamber. Greenco's blower are reliable, low-maintenance and durable and are the first choice for many applications in mechanical engineering such as Aquaculture, Food, Printer, Textile industries. With their high inlet volume flow up to 2,500 m3/h and a differential pressure up to 780 mbar, our low noise G-series all rounders have earned their reputation and convinced thousands of customers all over the world. Advantages: Quiet, robust and Light weight. Reliable and built-to-last, virtually maintenance free. Adjustable speed via external or integral frequency converter. Specification: Model 2RB 510-7AH26 Stage Single Stage Power (kW) 1.6 Voltage (V) 415 Phases (PH) Three Phase Airflow (m3/h) 210 Pressure (mbar) 190 Vacuum (mbar) -200 Inlet/outlet (Inch) G 2 TH.CL IP55 IN.CL F/H N.weight (kg) 23 Sound dB(A) 64 read more

Pedrollo centrifugal pump with energy saving motor “IE3”. Model: F80/160A (Made in Italy) Three phase, 415V. Descriptions Used for: water supply, cleaning sets, pressure boosting, firefighting sets, irrigation, industrial applications, water circulation in climatisation sets, agricultural applications. The pumps must be installed in enclosed places, or at least protected against inclement weather. Features Liquid type: clean water Uses: industrial Applications: water supply systems, fire-fighting sets, air conditioning systems, washing systems, pressure systems, cooling systems, irrigation pumps typology: surface Family: standardized centrifugal pumps Performance Range Flow rate up to 6000 l/min (360,0 m³/h) Head up to 95 m Applications Limit Temperature of the liquid from -10 °C to +90 °C Ambient Temperature da -10 °C to +40 °C Manometric suction lift up to 7 m Max. pressure in pump body 10 bar (PN10) Continuous service S1 Specifications Size Discharge 4″ x 3″ Power 22000 W / Three phase Flow Rate 500 ~ 4000 L/min Head 40 ~ 25 meters Manometric Suction Lift Max. 7 meters Liquid Temperature Max. +90°C Environment Temperature Max. +40°C Dimensions (L x W x H) 779mm x 330mm x 405mm Weight 145 kg read more